System Clock Setup By Station Dialing - NEC UNIVERGE SV9300 User Manual

PATTERN 2
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Dial Whisper Page access code or
press Whisper Page feature key.
You will receive a feature dial tone.
11:00 AM SUN 1 JUN 2014
CB CW
3.
Dial desired extension number.
You will receive a service set tone.
11:00 AM SUN 1 JUN 2014
Recall VOICE
4.
Listen to conversation and speak to
called terminal only.
CALL WAITING
11:00 AM SUN 1 JUN 2014
MIC CONF
TO ANSWER
1.
Press Answer key.
Call in progress is placed on hold.
A hold tone is not transmitted to the other
party of the original call.
Calling terminal and called terminal can
privately speak.
Answer key lamp lights red. →
CW
11:00 AM SUN 1 JUN 2014
MIC Mute
>>>>
201
CB >>>>
201
Recall
201
91
FEATURE OPERATION
2.
Press Answer key.
Answer key lamp goes off. →
Return to original call.
CW
11:00 AM SUN 1 JUN 2014
MIC CONF
SYSTEM CLOCK SETUP
BY STATION DIALING
This feature enables a terminal user to adjust the
system clock.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2.
Dial System Clock Setup access
code or press System Clock Setup
feature key.
You will receive a feature dial tone.
11:00 AM SUN 1 JUN 2014
Recall PICK
3.
Dial new time in 24 hr. format using
6 digits (HHMMSS).
You will receive a service set tone.
4.
Press Speaker key.
Speaker key lamp goes off. →
201
Recall
>>>>
110000