To Originate A Call Using Speed Calling (-Station/Group)98; To Originate A Call Using Speed Calling - System - NEC DT730 User Manual

TO ORIGINATE A CALL USING
SPEED CALLING (-STATION/
GROUP)
Press key.
Redial
Press the desired speed calling number.
LNR[ ]/SPD[_ _]
*
TO ORIGINATE A CALL USING
SPEED CALLING - SYSTEM
To program Speed Calling – System key (on
one-touch speed calling key)
Press Feature key.
Press desired One-Touch Speed Calling key. The
LCD displays previously stored digits.
Dial the "Speed Calling – System" access code and
the abbreviated call code.
Press Feature key again.
SPEED SET
4:26 PM TUE 13 APR 2004
To operate from the Speed Calling – System key
Press the "Speed Calling – System" key.
–X
XXXXXX
98
4:26 PM TUE 13 APR 2004
If the DT Series does not have the "Speed Calling –
System" key, dial the "Speed Calling – System"
access code, then the abbreviated call code.
To operate from the Directory key
Press key.
Directory
Dial the abbreviated call code (maximum of 4 dig-
its).
4:26 PM TUE 13 APR 2004
XXXX
XXXX