Change Bluetooth Device Name; Pair With A Bluetooth Device - NEC UNIVERGE GT890 User Manual

Change Bluetooth Device Name

The phone uses "ITX-3370_XXXXXX" as Bluetooth device name by default where "XXXXXX" are the last
6 digits of the phone's Bluetooth MAC address. The device name will be visible to other devices when
connecting them. Follow the steps below to change the name:
1. Go to the application menuSettingsFeaturesBluetooth
2. Turn on Bluetooth.
3. Select Additional settings.
4. Tap "Device name".
5. Enter a name and tap "Rename".

Pair with a Bluetooth Device

Before connecting the phone with another Bluetooth device, you must pair them first. They will stay paired
afterwards unless they are unpaired.
1. Go to the application menuSettings  Features  Bluetooth
2. Turn on Bluetooth.
3. Tap Additional settings and select "Visible to nearby Bluetooth devices" to make the GT890 phone
visible to all nearby Bluetooth devices.
4. The phone scans and displays the IDs of all available Bluetooth devices in range. If the device you
would like to pair with does not show up in the list (available devices), ensure that the other device is
turned on and set to be discoverable.
5. If the GT890 stops scanning before the other device is ready, press
6. Once the Bluetooth device shows up in the result, tap on it to start pairing. Confirm the passkey in the
prompted message (if any). Or if passcode is required, please refer to the device's documentation or
other procedures to obtain the passcode.
222
button to scan again.