Table of Contents
Advertisement
14
User Guide
Filling using the vacuum function
Make sure that the valve
Before you start the actual filling we recommend that you adjust the vacuum to approx.
100 mbar - see
Insert the hose
Open the valve
Start the device again as described in
page
15. The vacuum system will now start to suck water from the container and into the
tub
Follow the filling progress on the scale
close the valve
P/N 390225-C
11/2021
is closed.
"Operation and adjustment of chamber vacuum" on page
into a filled water container
.
.
and then stop the device.
EN
Dansensor
.
"Operation and adjustment of chamber vacuum" on
and when the required level has been reached,
LeakPointer H
O
®
2
15.
Advertisement
Table of Contents
