Table of Contents
Advertisement
16
User Guide
Package testing
1. Ensure that the right amount of water has been filled into the tub see
page
2. Place the test sample
3. Start test and if necessary adjust the vacuum as described in
chamber vacuum" on page
4. When vacuum is stable you can inspect the sample. Air bubbles
is a leak and also where the leak is located.
5. When finished, push the button
opens.
6. Now you are ready to test another sample.
P/N 390225-C
11/2021
12.
in the water.
15.
EN
to release it. The tub ventilates and finally the lid
Dansensor
LeakPointer H
®
"Filling of water" on
"Operation and adjustment of
will indicate that there
O
2
Advertisement
Table of Contents
