Operating; Operation And Adjustment Of Chamber Vacuum - Ametek mocon Dansensor LeakPointer H2O User Manual

Dansensor LeakPointer H
®

3. Operating

Operation and adjustment of chamber vacuum


1. Close the lid
2. While slightly pressing the lid downwards, start the vacuum ejector by pushing the red

button . The button must be pressed hard enough to lock in the pressed position.
3. When you feel the lid being sucked close to the tub, you can let go.
4. If necessary, unlock the knob
tub by turning the knob. Turn clockwise to increase vacuum and anticlockwise to
decrease vacuum. The vacuum gauge
5. When the desired vacuum is set and stable, you can lock the knob
If necessary, pull out the knob, before making adjustments.
6. When finished, push the button
opens.
O EN
2
.

by pulling it outwards, then adjust the vacuum inside the


to release it. The tub ventilates and finally the lid
shows the current vacuum.
User Guide

by pushing it in. 

P/N 390225-C
11/2021
15