Christie CineLife+ CP4415-RGB Installation And Setup Manual page 29

1. Loosen the six screws to remove the rear cover.
2. On the back right side of the projector, remove the four screws securing the AC receptacle
knockout plate.
The AC supply is routed to the terminal block through an appropriate strain relief mounted on
this knockout plate.
3. To open the AC input area of the projector, remove the six screws seucring the cover and
swing the cover downwards to open it.
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
29