Christie CineLife+ CP4415-RGB Installation And Setup Manual page 16

Hazard distance graph for CP4435-RGB lenses
Hazard
distance
(m)
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
• The projection room shall be clearly identified by the posting of laser warning and restricted
access signs, and by restricting entry through physical means. The projection room sign must
display the warning "No direct exposure to beam shall be permitted".
• The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Throw ratio
High brightness lenses
High contrast lenses
Ultra high contrast
Introduction
16