Electrical Connections - Ametek mocon Dansensor MAP Mix ProVectus User Manual

20 User Guide

Electrical connections

Connect the power supply cable

(The power cable is delivered with the device).
Connect a 25-pole communication cable

appropriate port on the packaging machine. This cable is delivered with the device.
See cable specifications in
Connect a 9-pole serial cable

the MAP Check 3 or a master mixer or to the appropriate port on the packaging machine -
see "COM-1/COM-2 Cables" on page 23
Connect a 9-pole serial cable

slave mixer (option) - see
delivered with the device.
Connect a LAN/Ethernet cable

your local area network This cable is not delivered with the device.
The USB connector (labelled

exporting/importing log data, device settings etc.
On "Stand-Alone" versions you can use the USB connector on the device front as well.
P/N 300862-K
11/2019
"I/O Cable" on page


"COM-1/COM-2 Cables" on page 23

NOTE! Use CAT6 cables for optimal noise immunity.

EN Dansensor

between a power outlet and the "POWER" connector.

from the "I/O CONTROL" connector to the
21.
from the "COM1" connector to the "COM2" connector on
for details. This cable is not delivered with the device.
from the "COM2" connector to the "COM1" connector on a
from the LAN connector (labelled
) can be used for connecting a USB Memory stick
MAP Mix Provectus
®
for details. This cable is not
) to a connector on

for