Errors/Warnings; Error/Warning Messages - Ametek mocon Dansensor MAP Mix ProVectus User Manual

Dansensor MAP Mix Provectus
®

Errors/Warnings

Error/Warning messages

In case a device error or warning occurs, a pop-up window appears on the display. An error
will stop the mixer as well (a warning will not).
2 Product 2 :
% O
Error 76
2
% CO
2
Mixer low pressure alarm on gas input 2
% N
2
O CO N
1 2
2 2 2
Close
6.1 bar 6.0 bar 6.2 bar
Product Menu
2 Product 2 :
% O
Warning 23
2
% CO
2
Internal memory full. Data logging stopped
% N
2
O CO N
1 2
2 2 2
Close
6.1 bar 6.0 bar 6.2 bar
Product Menu
The window shows the type (error or warning), the error/warning number and a brief
description of the error/warning.
To acknowledge the error/warning and close the pop-up window either press the Close
button or the X button in the upper right corner.
Before you can start mixer again you must clear the error by pressing the Fault button.
The error/warning number may be reported to a Service Technician to correct any errors.
See the complete "Error/Warning list" on page
A list of the most recent errors/warnings is available from the Diagnostics menu - see
"Diagnostics menu" on page 50
"Black Box" models
In case of an error/warning the indicator lamp on the device front changes to red (error =
steady, warning = flashing) and an error signal is sent to the packaging machine.
A description of the error/warning can only be displayed on the packaging machine's display
if the packaging machine has been prepared with the necessary communication software.
EN
12:37
28/03/11
Flow
l/min
500
2 Product 2 :
3
4.0 bar
Start
12:37
28/03/11
O
6.1 bar
Flow
l/min
500
3
4.0 bar
Start
for details.
28/03/11
% O
2
Flow
% CO l/min
2
500
% N
2
CO N
1 2 3
2 2 2
6.0 bar 6.2 bar 4.0 bar
Product Menu Fault
32.
User Guide
12:37
P/N 300862-K
11/2019
31