Table of Contents
Advertisement
1.
Figure 2.4: Dryer Installation
Electrical Connections
1. Remove terminal cover.
2. Connect the 4 to 20 mA analog output and alarm contacts from the analyzer to user
recording equipment. Refer to figure 2.5 and figure 2.6.
3. Connect RS-232 or RS-485 serial communication from analyzer to the PC being used for
customer parameter setup. Refer to figures 2.7 through 2.9.
4. Insert the RS-485 termination plug into the RS-485 out connection if communicating
with one analyzer or the last in a chain. Refer to figure 2.8.
5. Connect 24Vdc power to analyzer.
a.
2.
3.
C.
e.
Instalation and Startup 2-7
Advertisement
Table of Contents
