Selecting A Product For Mixing; Start Mixer; Analog Control - Ametek mocon Dansensor MAP Mix ProVectus User Manual

30 User Guide

Selecting a product for mixing

Select a product for measuring by selecting it from the Products list as described below:
1. From the main screen press the Product key to bring up the Products screen.
Product 1
Product 2
Product 3
Product 4
Product 5
Product 6
The Products list holds a fixed amount of products (10) and you cannot delete a product
or add new products.
Blue text indicates that the product has logged data.
2. Use scroll keys
and return to the measuring screen.

Start mixer

2: Product 2
%
%
%
O
1
2
6.1 bar
Product
The mixer can be started and stopped manually using the Start/Stop key in the main screen.
If the device has been setup for external start/stop control, the external control signal from
the packaging machine determines when the mixer starts and stops and the Start/Stop key
will be disabled in the main screen.

Analog control

Analog control
%
%
%
O
1
2
6.1 bar
Product
If mixer has been set-up for analog control (see
mix is controlled by the packaging machine and thus the Product key for selection of
products is disabled.
P/N 300862-K
11/2019
Products
and to locate the appropriate product then press product to select it
12:37
28/03/11
O
2
Flow
l/min
CO
2
500
N
2
CO N
2 3
2 2
6.0 bar 6.2 bar 4.0 bar
Menu Start
12:37
28/03/11
O
2
Flow
l/min
CO
2
500
N
2
CO N
2 3
2 2
6.0 bar 6.2 bar 4.0 bar
Menu Stop
EN Dansensor
2: Product 2
% O
2
Flow
l/min
% CO
2
500
% N
2
O CO N
1 2 3
2 2 2
6.1 bar 6.0 bar 6.2 bar 4.0 bar
Product Menu Start
"Mixer configuration" on page 52
MAP Mix Provectus
®

12:37
28/03/11
for details) the