Quantitative Information; Functional Tests Performed To Obtain The Quantitative Information - AGFA DX-D 100 User Manual

2.9

QUANTITATIVE INFORMATION

.
Note
2.9.1

FUNCTIONAL TESTS PERFORMED TO OBTAIN THE QUANTITATIVE INFORMATION

.
Note
0188K EN 20201116
The following tables show the Quantitative Information associated
to this equipment
IEC 60601-1-3:2008 and IEC 60601-1-3:2008+AMD1:2013. This
information illustrates loading factors for image performance and
supplies Dose indication examples. Therefore, these tables are an
instance of the adjustment of Loading Factors, Focal Spot
Selection, SID and Collimator opening, which affect to the
radiation quality or to the radiation dose rate applied in normal use.
Equipment:
These functional tests have been performed with the following
configuration: DR Detector, maximum power X-Ray Tube (50kW)
and Collimator Ralco R221A. The results obtained with this
configuration are representative of the worst case within the
different configurations of the unit.
Instrumentation used:
Dosimeters:

VacuDAP Compact
G
Fluke 481
G
Unfors Xi R/F
G
Thermohygrometer Testo 608--H2.

Water Phantom made of Polymethyl-methacrylate (PMMA) layers:

25 cm x 25 cm x 15 cm.
Test details:
The measurements were made using the most common APR

configurations performed with this unit.
DX-D 100 Mobile X-ray Unit
according with the
User Manual
Standard
35