General Features - AGFA DX-D 100 User Manual

DX-D 100 Mobile X-ray Unit
User Manual
1.1

GENERAL FEATURES

4
The main features of this Unit are:
A solid and ergonomic design. Ease of operation; security and precision

of all positioning movements relative to the patient.
Standard electrical outlet operation with single-phase lines at 100 / 110 /

120 / 127 / 220 / 230 / 240 V~. Automatic line voltage compensation.
Independent operation without mains connection (Stand-Alone). In

normal operating conditions, the Battery Charger keeps batteries stable
and fully charged, provided the Unit is connected to the mains (charging).
Constant potential high frequency.

Controls at the Handlebar and Tube-Collimator Assembly for motorized

movements of the equipment.
Controls for lock release of Rotating Column (Standard or Telescopic)

and Telescopic Arm. Column rotation in relation to its vertical axis
o
(¦317 ), telescopic and vertical motion of the Arm.
Tube-Collimator Assembly rotation in relation to its transverse axis

o
(360 ) and horizontal axis (120
vertical axis (180
Operation Control through the NX application and the Software Console.

X-ray Handswitch for X-ray exposures.

Remote infrared X-ray Handswitch (optional).

Dosimetry (optional).

Manual Collimation.

Heat Unit storage for the X-ray Tube, even after turning ON/OFF the

equipment.
Tube protection circuitry prolongs Tube life and increases system

performance.
Equipped with closed loop control of X-ray Tube current, kVp and

filaments, which minimize potential errors and the need for
readjustments.
o
). Collimator rotation in relation to its
o
).
0188K EN 20201116