AGFA DX-D 100 User Manual page 69

3.9 COLLIMATOR CONTROLS
9
5
0188K EN 20201116
R221 - Standard
3
4
8
Collimator controls (Refer to the Collimator Manual for further information):
1. Collimator Light push-button. After pressing the Collimator Light
push-button, the Light remains illuminated for a few seconds before
automatically switching off.
2. Two knobs to adjust the internal blades. The Exposure Field is
adjusted by setting the two knobs. The table on the Collimator Panel
shows the number to set with the knobs to open the blades.
3. Rail System with two guides in order to install the external additional
filters used for pediatric examinations (0.1 mm Cu or 3.5 mm Al) in the
upper guide and the Radiation Meter in the lower one.
4. SID Guard (Source-Image Distance).
5. Measuring tape to measure the SID.
6. Variable Filtration (optional), with the following filtration options:
0 mm AL
The LED over the filters wheel will lit when selecting a filtration option.
7. Double Laser selector (optional), for Image-Receptor alignment.
8. Radiation Meter (optional). Refer to Section 3.10 of Dosimetry.
9. Hand-grips for positioning the Tube-Collimator Assembly.
10. Hand-grips Support (option) for easily positioning the Tube-Collimator.
R221 - with Filtration and Double Laser
10
2
1
5
1 mm Al + 0.1 mm Cu
1 mm Al + 0.2 mm Cu
J
DX-D 100 Mobile X-ray Unit
User Manual
8 4
7
2 mm AL
J J
6
9
2
1
3
J J J
61