AGFA DX-D 100 User Manual page 51

3.2 CONTROL PANEL
1
EMERGENCY SWITCH OFF
2 BATTERY CHARGE LEVEL
3
SWITCH ON / OFF CONTROL: KEY
4
POWER LINE CONNECTION LAMP
5
COLLIMATOR LAMP BUTTON
3.2.1 ON / OFF CONTROL
.
Note
ON
OFF
0188K EN 20201116
This control is used to turn the unit ON and OFF.
After turning OFF the Unit, wait at least 10 seconds before turning
it ON again. This action assures a proper start-up of the computer.
SWITCH ON / OFF KEY
The Key in the "ON" position is used to start the Unit, allowing the Mobile motion
and switching ON the Generator and Console for radiographic operation. When
the key is in "ON" position, the "ON" symbol is illuminated on the Control Panel.
The key in the "OFF" position switches OFF all the equipment functions, after
a delay to allow the user to shut down the Software Applications on the Control
Console and to move the Arm to Parking Position. The Charging Circuits are
not switched off and can only be switched ON/OFF with the Line Circuit Breaker.
DX-D 100 Mobile X-ray Unit
User Manual
1
2
3
4
5
43