AGFA DX-D 100 User Manual page 65

Support for Key Sets
Front Bumper
.
Note
0188K EN 20201116
MANUAL CLUTCH SCREWS:
In case the Unit has to be moved manually, dismount the Hubcap and remove
the two (2) Clutch Screws (Allen type) located on each wheel. This will uncouple
the wheels from the motors (releasing the brakes) allowing the free motion of
the Unit.
Depending on the type of Wheel, a Key Set is provided, located near the left
Back Wheel of the Unit. For accessing this Key Set, dismount the Support from
the lower side of the Mobile Unit.
Clutch Screws
Wheels with Screwed Hubcap
DRIVE THE UNIT MANUALLY ONLY WHEN MOTORIZED
MOTIONS CANNOT
MALFUNCTIONING OR MOTOR BATTERY DISCHARGE).
IN THIS CASE, NEVER DRIVE THE UNIT ALONG A RAMP OR
INCLINED SURFACES, DRIVE IT ONLY IN FLAT SURFACES
TO AVOID PERSONAL
EQUIPMENT DUE TO ITS HEAVY WEIGHT.
FRONT BUMPER:
It is equipped with several sensors that stop motor movement in the event of a
frontal collision.
The Lateral Bumpers are not equipped with sensors.
DX-D 100 Mobile X-ray Unit
Clutch Screws
Wheels with Magnetic Hubcap
BE PERFORMED
INJURIES OR DAMAGE
User Manual
(DUE TO
TO
57