AGFA DX-D 100 User Manual page 66

DX-D 100 Mobile X-ray Unit
User Manual
3.8.2 PARKING POSITION OF THE ARM
Parking
Detent
Catch
.
Note
58
The Unit is in Parking Position when the Parking Detent is secure in the Catch.
Place the Arm in Parking Position as follows:
Fully retract the Telescopic Arm and turn the Column until the Parking

Detent is aligned with the Catch.
Lower the Arm and fully insert the Parking Detent into the Catch, until a

"click" is heard. The Blocking Lever down indicates that it has been
properly placed in Parking Position.
To release the Arm from Parking Position, push down the Arm while pressing
on the Brake Control at the Tube-Collimator Assembly.
or
Parking Detent
ALWAYS KEEP THE ARM IN PARKING POSITION EXCEPT
WHEN PERFORMING RADIOGRAPHIC EXAMS. THIS WILL
PREVENT INJURIES
DISPLACEMENT.
The unit cannot perform exposures when the Arm is secured in the
parking position.
Depending on the configuration, the unit cannot perform
exposures when the Arm with the Tube-Collimator Assembly is
straight above the Control Panel (but not secured in the parking
position); in this configuration the Column must be taken out of
the 0 rotation position to be able to make exposures.
_
Catch
OR UNIT
Blocking Lever
DAMAGE DURING
0188K EN 20201116