AGFA DX-D 100 User Manual page 62

DX-D 100 Mobile X-ray Unit
User Manual
Table 3-1
Beep Sequence - - Failure condition
BEEP
DESCRIPTION
SEQUENCE
Handlebar activated
during startup
1 beep
(deadman).
2 beeps Motor Current Error.
Handlebar pressed or
3 beeps
pulled during startup.
Fine Positioning Controls
4 beeps on the
activated during startup.
6 beeps Motor Encoder Error.
8 beeps Gauges Failure.
No Beeps Fatal error.
Continuous
Fatal error.
Beep
54
DESCRIPTION
Mobile movements
only allowed using the Fine
Positioning Controls.
Mobile movements are not
allowed.
Mobile movements
only allowed using the Fine
Positioning Controls.
Mobile movements
Handgrips only allowed using the
Handlebar.
Mobile movements are not
allowed.
Mobile movements
only allowed using the Fine
Positioning Controls.
Mobile movements
are blocked.
Mobile movements
are blocked.
Ensure that the Handlebar (deadman) is not pressed and
then, try to drive the unit using the Handlebar.
are
If the problem persists, restart the unit.
If the handlebar (deadman) is still blocked or any of the
displacement controls does not respond, contact
Technical Service.
Restart the unit and try to drive the unit again.
If the problem persists, contact Technical Service.
Ensure that the Handlebar is not pressed nor pulled and
then try to drive the unit using the Handlebar.
are
If the problem persists, restart the unit.
If the handlebar is still blocked or any of the displacement
controls does not respond, contact Technical Service.
Ensure that the Fine Positioning Controls are not pressed
and restart the unit.
are
Try to drive the unit using the Fine Positioning Controls.
If the problem persists, contact Technical Service.
After releasing the Handlebar and pressing on it again, it
is allowed driving the unit at slow speed, in order to move
it to an adequate area for servicing purposes.
Contact Technical Service.
are Move the unit to an adequate area for servicing purposes.
Contact Technical Service.
Contact Technical Service.
Contact Technical Service.
ACTION
0188K EN 20201116