AGFA DX-D 100 User Manual page 41

GUIDANCE AND MANUFACTURER'S DECLARATION - ELECTROMAGNETIC IMMUNITY
This X-ray System is intended for use in an electromagnetic environment specified below.
The customer or user of this X-ray System should assure that it is used in such an environment.
Immunity Test
Radiated RF EM fields
IEC 61000-4-3
Proximity fields from RF y
wireless Communications i l C i ti
equipment
IEC 61000-4-3
Conducted disturbances
induced by RF fields induced by RF fields
IEC 61000-4-6
NOTE - - The ISM (Industrial, Scientific and Medical) bands between 0.15 MHz and 80 MHz are 6.765 MHz to 6.795 MHz; 13.553 MHz
to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz.
The amateur radio bands between 0.15 MHz and 80 MHz are 1.8 MHz to 2.0 MHz; 3.5 MHz to 4.0 MHz; 5.3 MHz to 5.4 MHz; 7 MHz
to 7.3 MHz; 10.1 MHz to 10.15 MHz; 14 MHz to 14.2 MHz; 18.07 MHz to 18.17 MHz; 21.0 MHz to 21.4 MHz; 24.89 MHz to 24.99 MHz;
28.0 MHz to 29.7 MHz; and 50.0 MHz to 54.0 MHz.
0188K EN 20201116
(IEC 60601-1-2:2014)
IEC 60601-1-2:2014
Test Level
3 Vrms
from 80 MHz to 2.7 GHz
(80% AM at 1 kHz)
Refer to next table
"IMMUNITY "IMMUNITY
REQUIREMENTS FOR RF
WIRELESS
COMMUNICATIONS
EQUIPMENT"
3 Vrms
from 150 kHz to 80 Mhz
6 Vrms in ISM bands
from 150 kHz to 80 MHz
(80% AM at 1 kHz)
Compliance Level
3 Vrms
from 80 MHz to 2.7 GHz
(80% AM at 1 kHz)
Refer to next table
"IMMUNITY "IMMUNITY
REQUIREMENTS FOR RF
WIRELESS
COMMUNICATIONS
EQUIPMENT"
3 Vrms
from 150 kHz to 80 Mhz
6 Vrms in ISM bands
from 150 kHz to 80 MHz
(80% AM at 1 kHz)
DX-D 100 Mobile X-ray Unit
User Manual
Electromagnetic
environment - guidance
Portable RF communications
equipment (including peripherals such
as antenna cables and
antennas) should be used no closer
than 30 cm to any part of the equipment,
including cables specified
manufacturer. Otherwise, degradation
of the performance of this equipment p
could result could result.
external
by
q p
33