Setting - AMT Datasouth Fastmark M9 Plus User Manual

6.3 Setting

Tap the "Command Set" item on LCD to switch between TSPL and ZPL2. Select the
"Command Set" item by navigational key and press the right soft key to switch between TSPL
and ZPL2.
6.3.1 TSPL
This "TSPL" category can modify the printer settings for TSPL.
Setting
Item
Speed
Density
TSPL
Description
Use this item to setup print speed. Available setting range is
2~14 for 203dpi, 2~12 for 300dpi and 1~6 for 600dpi.
Use this option to setup printing darkness. The available setting
range is from 0 to 15. You may need to adjust your density based
on selected media.
Speed
Density
Direction
Print Mode
Offset
Shift X
Shift Y
Reference X
Reference Y
Code Page
Country
- 39 -
None
Batch Mode
Peeler Mode
Cutter Mode
Cutter Batch
Rewinder Mode
203 dpi: 6
300 dpi: 4
Default
8