Printer Function - AMT Datasouth Fastmark M9 Plus User Manual

5.2 Printer Function

1. Connect the printer and computer with a cable.
2. Select the PC interface connected to the bar code printer.
USB cable
The default interface setting is a
USB interface. If a USB cable is
connected to the printer, no other
settings need to be changed in the
interface field.
3. Click the "Printer Function" button to setup.
4. Detail of functions in the Printer Function Group are listed below.
Other cable
Function
Calibrate Sensor
Ethernet Setup
RTC Setup
Factory Default
Reset Printer
Print Test Page
Configuration Page
Dump Text
Ignore AUTO.BAS
Exit Line Mode
Password Setup
- 32 -
1
Description
Calibrate the sensor specified in the Printer
Setup group media sensor field
Setup the IP address, subnet mask, gateway for
the internal Ethernet
Synchronize printer Real Time Clock with PC
Initialize the printer and restore the settings to
factory default.
Reboot printer
Print a test page
Print printer configuration
To activate the printer dump mode.
Ignore the downloaded AUTO.BAS program
Exit line mode.
Set the password to protect the settings
2