AMT Datasouth Fastmark M9 Plus User Manual page 39

If the wrinkle on the label starts from the
lower right side to upper left side, please do
the following adjustment.
1. Switch the ribbon tension adjustment
knob clockwise per 1 level and print the
label again to check if the wrinkle is gone.
2. If the ribbon tension adjustment knob is
positioned on the scales innermost side
but didn't improve the ribbon wrinkle,
please switch the printhead pressure
adjustment knob per 1 level and print
the label again to check if the wrinkle is
gone.
3. If the wrinkle can't be avoided, please
contact the Customer Service
Department of your purchased reseller
or distributor for service.
If the wrinkle on the label starts from the lower left
side to upper right side, please do the following
adjustment.
1. Switch the ribbon tension adjustment knob
counterclockwise per 1 level and print the
label again to check if the wrinkle is gone.
2. If the ribbon tension adjustment knob is
positioned on the scales outermost side
but didn't improve the ribbon wrinkle,
please switch the printhead pressure
adjustment knob per 1 level and print the
label again to check if the wrinkle is
gone.
3. If the wrinkle can't be avoided, please
contact the Customer Service
Department of your purchased reseller or
distributor for service.
- 30 -