AMT Datasouth Fastmark M9 Plus User Manual page 55

6.5.2 Ethernet
Use this menu to configure internal Ethernet configuration check the printer's Ethernet module
status, and reset the Ethernet module.
Menu
Item
Status
Config.
Interface
Description
Use this menu to check the Ethernet IP address and
MAC setting status.
DHCP:
This item is used to set ON or OFF the DHCP
(Dynamic Host Configuration Protocol) network
protocol.
Static IP:
Use this menu to set the printer's IP address, subnet
mask and gateway.
Ethernet
- 46 -
Status
Config
Default
N/A
DHCP