AMT Datasouth Fastmark M9 Plus User Manual page 61

Captures the data from the communications port and prints out the data
received by the printer. In the dump mode, all characters will be printed in 2
columns. The left side characters are received from your system and right side
data are the corresponding hexadecimal value of the characters. It allows
users or engineers to verify and debug the program.
Dump Mode
Note:
Dump mode requires 4" wide media.
This feature is used to check printheads' temperature and bad dots.
Printhead
This feature is used to check LCDs' color state.
Display
This feature is used to check sensors intensity and reading state.
Sensor
DOWNLOA
D „TEST2. 44 20 22 54 45 53 54 32 2E
DAT",5,CL 44 41 54 22 2C 35 2C 43 4C
S
AD F,"TES 41 44 20 46 2C 22 54 45 53
T4.DAT",5 54 34 2E 44 41 54 22 2C 35
,CLS
NLOAD „TE 4E 4C 4F 41 44 20 22 54 45
ST2.DAT", 53 54 32 2E 44 41 54 22 2C
5,CLS
WNLOAD F, 57 4E 4C 4F 41 44 20 46 2C
ASCII Data
„TEST4.DA 22 54 45 53 54 34 2E 44 41
T",5,CLS
AT",5,CLS 41 54 22 2C 35 2C 43 4C 53
D F,"TEST 44 20 46 2C 22 54 45 53 54
4.DAT",5, 34 2E 44 41 54 22 2C 35 2C
CLS
- 52 -
Number of download files Total
& available memory space
Printhead check pattern
Note:
Checking dot damage
requires 4" wide
media width.
0D 0A 44 4F 57 4E 4C 4F 4I
DOWNLO 53 0D 0A 44 4F 57 4E 4C 4F
DOW 2C 43 4C 53 0D 0A 44 4F 57
DO 35 2C 43 4C 53 0D 0A 44 4F
54 22 2C 35 2C 43 4C 53 0D
DOWNLOAD 0A 44 4F 57 4E 4C 4F 41 44
"TEST2.D 20 22 54 45 53 54 32 2E 44
DOWNLOA 0D 0A 44 4F 57 4E 4C 4F 4I
43 4C 53 0D 0A
Hexadecimal data related to
left column of ASCII data