AMT Datasouth Fastmark M9 Plus User Manual page 45

The default IP address is obtained by DHCP. To change the setting to static IP address, click "Static IP"
radio button then enter the IP address, subnet mask and gateway. Click "Set IP" for settings to take
effect.
Users can change the "Printer Name" field then click "Set Printer Name" to effect changes.
Note: After clicking the "Set Printer Name" or "Set IP" button, the printer will reset to new
settings.
8. Click "Exit" button to exit the Ethernet interface setup and go back to the Diagnostic Tool main screen.
"Factory Default" button
This function will reset the IP, subnet mask, gateway parameters obtained by DHCP and reset the printer
name.
"Web setup" button
Except to use the Diagnostic Utility to setup the printer, you can also explore and configure the printer
settings and status or update the firmware with the IE or Firefox web browser. This feature provides a
user-friendly setup interface and the capability to manage the printer remotely over a network.
- 36 -