Led Indicators; Setting Up The Printer - AMT Datasouth Fastmark M6 PLUS Series User Manual

2.3.2 LED Indicators

LED
POWER
ON-LINE
ERROR

2.4 Setting up the Printer

1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the
power cord into a properly grounded power outlet.
Note:
Please switch OFF printer power switch prior to plug in the power cord to printer power jack.
Status Indication
Off The printer power is turned off
On The printer power is turned on
On Printer is ready
Pause
Blinking
Downloading data into printer
Off Printer is ready
On "Carriage open", "Cutter error" or "Clearing data"
Blinking "No paper", "Paper jam" or "No ribbon"
12