AMT Datasouth Fastmark M9 Plus User Manual page 44

5.3.3 Using Ethernet interface to setup Ethernet interface
1. Connect the computer and the printer to the LAN.
2. Turn on the printer power.
3. Start the Diagnostic Utility by double clicks on the
4. Select "Ethernet" as the interface then click on the "Setup" button to setup the IP address, subnet mask
and gateway for the internal Ethernet.
5. Click the "Discover Device" button to explore the printers that exist on the network.
6. Select the printer on the left side of listed printers, the correspondent IP address will be shown in the
right side "IP address/Printer Name" field.
7. Click "Change IP Address" to configure the IP address obtained by DHCP or static.
icon.
- 35 -