AMT Datasouth Fastmark M9 Plus User Manual page 50

6.3.2 ZPL2
This "ZPL2" category can modify the printer settings for ZPL2.
Item
Density
Print Speed
Menu ZPL2
Description
Use this item to setup printing darkness. The available settings
range from 0 to 30. You may need to adjust your density based
on selected media.
Use this item to setup print speed. Available setting range is
2~18 for 203dpi, 2~14 for 300dpi and 1.5 ~6 for 600dpi.
Darkness
Print Speed
Tear Off
Print Mode
Print Width
List Fonts
List Images
List Formats
List Setup
Control Prefix
Format Prefix
Delimiter Char
Media Power Up
Head Close
Label Top
Left Position
Reprint Mode
Format Convert
- 41 -
Tear Off
Peeler Off
Cutter
Rewind
Feed
Calibration
Length
No Motion
Feed
Calibration
Length
No Motion
Enabled
Disabled
None
150 -> 300
150 -> 600
200 -> 600
300 -> 600
Default
16
203 dpi: 6
300 dpi: 4