Installation; Setting Up The Printer - AMT Datasouth Fastmark M5e User Manual

Installation

Setting up the printer

1.
Place the printer on a flat, secure surface.
2.
Make sure the power switch is off.
3.
Connect the printer to the computer with the provided USB cable.
4.
Plug the AC power cord (female connector) into the power supply
socket. Then plug the DC power supply plug into the rear of the printer.
Then plug the power cord into a properly grounded power outlet.
DC power
supply plug
Verify the printer power switch is in the OFF
position before installing the power cord.
Power switch
Power supply
- 12 -
Power cord plug
Power cord
female connector