Setup; Setting Up The Printer - AMT Datasouth Fastmark M10XPd/Gen-2 User Manual

3. Setup

3.1 Setting up the printer

1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the power
cord into a properly grounded power outlet.
Note: Please turn OFF printer power switch prior to plugging in the power cord to the printer
power jack.
M10XPd Series
- 16 -
M10XPd Rewind Series