Battery Pack Description; Application Scenarios - Alpha ESS SMILE-T10-HV Installation Manual

PRODUCT INTRODUCTION AND APPLICATION SCENARIOS

3.2 Battery Pack Description

Figure 1 Battery pack appearance and dimensions
Item SMILE-BAT-8.2PH (OUTDOOR)
Dimension (W*H*D) 580*820*213 mm
Figure 2 Battery pack LED signals
Four LED indicators are provided on the display panel.
Different colors represent different states, green for SOC state, yellow for protection
state, red for error state.
12
SMILE-BAT-8.2PH (INDOOR)
580*730*230 mm
PRODUCT INTRODUCTION AND APPLICATION SCENARIOS
13
The LED indicators provide information about the SOC operational sta-tus of the battery
pack.
LED Indicator SOC
The first line of the LED indicator flashes every 10s.
The first line of the LED indicator is always on.
When the battery is being charged, the first line of
the LED indicator will flash every 3s.
The first and second line of the LED indicator are always
Standby:
on.
Green LEDs flash
When the battery is being charged, the second line of the
every second
LED indicator will flash every 3s.
The first, second and third line of the LED indicator are
always on.
When the battery is being charged, the third line of the
LED indicator will flash every 3s.
All the LED indicators are always on.
When the battery is being charged, the fourth line of the
LED indicator will flash every 3s.

3.3 Application Scenarios

AlphaESS SMILE-T10-HV system (include SMILE-T10-HV-INV and SMILE-BAT-8.2PH)
can be applied in DC-coupled systems (mostly new installation), AC-coupled systems
(mostly retrofit) and Hybrid-coupled systems (mostly retrofit, and PV capacity -increase),
as the following scheme show:
Description
SOC≤5%
5%＜SOC≤30%
30%＜SOC≤55%
55%＜SOC≤80%
80%≤SOC≤100%