Ems Instruction; Function Description; Introduction; Main Menu - Alpha ESS STORION-T50 Operation & Maintenance Manual

EMS INSTRUCTION

03 EMS Instruction

3.1 Function Description

I
fault Battery
Your Smart Energy
D B
Figure 3-1 EMS Interface
Table 1 Function Description
Object Name Description
A
Green:
Green:
Indicator LED
B
Flash:
C Green:
D Red: Fault
E
Down Button: Move cursor to downside or decrease value
F Return Button: Exit the current interface or function
Button Function
G ENT Button: Confirm the selection
H Up button: Move cursor to upside or increase value
I LCD Screen Display the information of the inverter in this LCD screen
F
H
E
G
Normal Internet
ENT
A C
The system is operating normally
Allow the battery to charge or discharge
Don't allow the battery to charge or discharge
Server Connected
06 07

3.2 Introduction

If you find the manual content is inconsistent with the software version, please contact
AlphaESS in time.
Power
Pload
Battery
offGridMode
Main Interface

3.2.1. Main menu

Status

History
Main menu
Setting
Information
3.2.2. Status
Grid
Solar
Status
Battery
Main Interface displays the system working
status and information, including:
0W
• Power: Total AC output power
00.0kWh
• Pload: Total load power.
• Battery: State of charge (SOC).
%
• offGridMode: Current working state of the
equipment, including alarm type.
In the Main interface, press ENT key to enter the
Menu.
System status data
System historical data
System settings
System message
The line voltage on the AC side of PCS
Uab/Ubc/Uca
Phase current on the AC side of PCS
Ia/Ib/Ic
F Frequency on the AC side of PCS
PInv Output power on the AC side of PCS
PmAC Total power read by meter on grid side
Power read by meter on PV inverter side
PmDC
U1 PV1 voltage
PV1 current
I1
PV1 power
P1
U2 PV2 voltage
PV2 current
I2
PV2 power
P2
PV inverter output
Pm_dc
U Battery voltage
Battery current
I
Battery power
P
Battery SOC
SOC
RelayL Relay status
EMS INSTRUCTION