Alpha ESS SMILE-T10-HV Installation Manual page 15

MOUNTING
2) For battery stack, lock the screw M6*6 on top of the first battery pack.
Place the battery positioning paper plate against the wall and the bottom with notch
against the first battery pack. Repeat steps 1-7.
The bottom limit holes of the second battery will match the top screws of the first battery.
24
5
1 4
2 6
3
25
6.3.2 Mounting the inverter
Dimensions in mm
The steps to mount the inverter are listed below:
1. Fit the bottom of the inverter's positioning paper plate into the top of the battery
against wall, mark the positions of the drill holes on the paper plate.
2. Cover the top of the battery with plastic bag and drill 4 holes on the wall with drill 10,
insert 4 screw anchors into the drill holes.
MOUNTING