Alpha ESS SMILE-T10-HV Installation Manual page 26

WIFI SETTING
Password
12345678
Connect to Router System
the hotspot Configuration Configuration
Auto reconnest
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
Adwanced
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Open the Wi-Fi network list
Cancel
Step 3: If your mobile phone hasn't connected to the system's hotspot, please
open the Wi-Fi network list. Please find the hotspot named by the product
SN in WLAN list then enter the password "12345678" and connect to it.
After successfully setting it, please go back to APP and click "Next".
Connect to
Connect to Router System
the hotspot
the hotspot Configuration Configuration
Choose the name of the WIFE
Wi-Fi
AlphaESS
shengyou
Password
AlphaESS-Server
Derrick_test
AlphaESS
AlphaESS
Jump Over
AL40010109000000
Connect
Router System
Configuration Configuration
admin
Change
Enter the password
Submit
46 47
Step 4: Select the WiFi of your home you are using, enter the password, complete
the WiFi configuration and submit. If there is no network currently, you can
click Jump over to skip the WiFi configuration step and directly set the
system parameters.
Note: The system will not be able to connect to the Internet without WiFi configuration.
Step 5: Set basic parameters, including PV capacity on the grid side, the type of meters,
safe-ty regulations and regional application standard. Click "Submit" when the
settings are complete.
Note: When the safety regulation is set as AS4777.2, the secondary sub-options can be
selected according to the region or local grid company (Please refer to Appendix 2).
WIFI SETTING