Alpha ESS SMILE-T10-HV Installation Manual page 16

MOUNTING
3. Attach the wall bracket to the wall using the screws with the tool of SW10
hexagon sleeve.
4. Hold the inverter by using the handles at two sides, attach the inverter onto the wall
bracket tilted slightly downwards. For easy wiring, please hang the second slot on the
back of the inverter onto the wall bracket.
5. Attach two holders to the sides of the bottom of the inverter and tighten them.
6. Make electrical connection (please refer to Section 7 Electrical Connection).
26
M4*10 Screw (X4)
27
6.3.3 Mounting the WiFi module
1. Remove the WiFi cover from the top of the inverter with Torx 20 screwdriver.
2. Tighten the WiFi module on top of the inverter.
MOUNTING