Jtag Connector (Zp1); Expansion Interface Iii Connectors (P1A-C, P2A, P3A); Usb Connector (P7); Power Connector (P18) - Analog Devices ADSP-BF609 EZ-KIT Lite Manual

JTAG Connector (ZP1)

is the connecting point for the SADA2 debug interface and is a 14-pin
ZP1
0.1" header.
Expansion Interface III Connectors (P1A–C, P2A,
P3A)
Five board-to-board connectors (
nals from the SPI, TWI, UART, SPORT, and GPIO interfaces of the
processor. The connectors are located on the bottom side of the board.
For more information, see
Part Description
120-pin, 0.6 mm
120-pin, 0.6 mm

USB Connector (P7)

Part Description
USB mini-Ab

Power Connector (P18)

Part Description
0.65 mm power jack
5.0VDC@3.6A power supply
ADSP-BF609 EZ-KIT Lite Evaluation System Manual
ADSP-BF609 EZ-KIT Lite Hardware Reference
,
P1A P1B
Expansion Interface
Manufacturer
HIROSE
Mating Connector
HIROSE
Manufacturer
MOLEX
Manufacturer
CUI
Mating Connector
GLOBETEK
, , , and ) provide sig-
P1C P2A P3A
III.
Part Number
FX8-120P-SV1(91)
FX8-120S-SV(21)
Part Number
56579-0576
Part Number
045-0883R
GS-1750(R)
2-27