Remote/Local Programming (R L) - Omron K3NH Operation Manual

Setting Mode
r l
FUNCTION
SETTING
MODELS
SETTING
EXAMPLE
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
56
Remote/Local Programming
• The K3NH can be set to remote or local mode in the option menu. The K3NH in
remote mode is operated through the host computer and the K3NH in local
mode is operated through the front panel key input.
Setting
Remote: rmt
Local: lcl
This setting is available for the K3NH with the Communications Output Board.
Follow the steps described below to set the K3NH to remote programming.
1. Press the Mode Key for more than one second while the opt setup menu is
1, 2, 3...
displayed. The aUg setting will appear.
2. Repeatedly press the Mode Key until the r l remote/local setting is dis-
played.
3. Press the Shift Key to display the prior setting lcl for changing. The PROG
indicator will flash.
4. Press the Up Key to display rmt.
lcl
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Section 3-2
Default
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model