Omron K3NH Operation Manual page 41

Setting Mode
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
6. Press the Shift Key to display the present set value 000 for changing. The
PROG indicator will flash.
Set Value LED Display Model
7. Press the Up and Shift Keys to set the value to 100. The input value will be
validated automatically if no change is made for five seconds. The in l
scaling lower limit value setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The dec p
decimal point position setting will be displayed for setting the next pa-
rameter.
Set Value LED Display Model
8. Press the Mode Key to display dec p decimal point position setting.
Set Value LED Display Model
9. Press the Shift Key to display the present set value %%%% for changing. The
PROG indicator will flash.
Set Value LED Display Model
10. Press the Shift Key to set the value to %%%.%. The input value will be validated
automatically if no change is made for five seconds. The dec p decimal
point position setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model
When no operation is executed for five seconds
Set Value LED Display Model
Section 3-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
33