Omron K3NH Operation Manual page 32

Setting Mode
SETTING
EXAMPLE
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
24
Follow the steps described below to input the following.
Setting value HH = "400"
Setting value H = "300"
Setting value L = "200"
Setting value LL = "100"
1. Press the Mode Key for more than one second while the sUset setting value
1, 2, 3...
menu is displayed. The sU.hh HH setting value setting will be displayed.
2. Press the Shift Key to display the set value 9999 for changing. The PROG
indicator will flash.
3. Press the Up and Shift Keys to set the value to 400. The input will be vali-
dated automatically if no change is made for five seconds. The sU.hh HH set-
ting value setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The sU.h H
setting value setting will be displayed for setting the next parameter.
4. Press the Mode Key to display the sU.h H setting value setting.
5. Press the Shift Key to display the set value 9999 for changing. The PROG
indicator will flash.
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Section 3-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model