Omron K3NH Operation Manual page 103

Connectors
Applicable Connectors
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Terminal Signal name
number
36 LL
37 COM
Note 1. Terminals 1, 25, and 37 have the same COM.
2. Refer to 2-3 Output Board for comparative outputs.
Use the connector provided with the K3NH or an equivalent connector for the
cable connecting to the BCD output connector.
The following connectors are provided with the K3NH.
Plug: XM2A-3701 (OMRON)
Hood: XM2S-3711 (OMRON)
The depth required for the installation of the K3NH is 200 mm min. in consider-
ation of the space required by the cable.
Connecting Conditions
Refer to the following for the connecting conditions of each I/O. Refer to 2-3 Out-
put Block for output signals HH through LL.
• Input
Input current with no voltage input:
Signal level
ON voltage:
OFF voltage:
• Output
Rated load voltage:
Rated load current:
Current leakage:
Signal
direction
Output LL output (See note 2.)
Output GND:VO (See note 1.)
10 mA
1.5 V max.
3 V min.
24 VDC
10 mA
10 µA max.
Section 6-1
Use
95