Omron K3NH Operation Manual page 62

Setting Mode
SETTING
EXAMPLE
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
54
Follow the steps described below to set the following.
H: 100
L: 0
1. Press the Mode Key for more than one second while the opt option menu is
1, 2, 3...
displayed. The aUg average processing setting will appear.
2. Repeatedly press the Mode Key until the lset.h H linear output range set-
ting is displayed.
3. Press the Shift Key to display the prior set value 9999 for changing. The
PROG indicator will flash.
4. Press the Up and Shift Keys to set the value to 100. The setting will be vali-
dated automatically if no change is made for five seconds. The lset.h H lin-
ear output range setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
5. Press the Mode Key to display the lset.l L linear output range setting.
6. Press the Shift Key to display the prior set value 1999 for changing. The
PROG indicator will flash.
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
Set Value LED Display Model
+
Set Value LED Display Model
Set Value LED Display Model
Section 3-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model