Omron K3NH Operation Manual page 45

Temperature meter
Table of Contents

Advertisement

Setting Mode
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
3. Press the Shift Key to display the prior set value 7 for changing. The PROG
indicator will flash.
Set Value LED Display Model
4. Press the Up Key to set the value to 8. The input value will be validated auto-
matically if no change is made for five seconds. The len word length setting
will be displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model
5. Press the Mode Key to display the sbit stop bit setting.
Set Value LED Display Model
6. Press the Shift Key to display the set value 2 for changing.
Set Value LED Display Model
7. Press the Up Key to set the value to 1. The input will be validated automati-
cally if no change is made for five seconds. The sbit stop bit setting will be
displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
Set Value LED Display Model
8. Press the Mode Key to display the prty parity bit setting.
Set Value LED Display Model
9. Press the Shift Key to display eUen for changing.
Set Value LED Display Model
Section 3-2
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
Basic Model
37

Advertisement

Table of Contents
loading

Table of Contents