Activating And Deactivating The Vibration Alarm; Setting The Auto Answer Function; Resetting The Defaults - Siemens HiPath 3000 Operating Instructions Manual

Silent alert
Auto Answer
Reset Handset
32

Activating and deactivating the vibration alarm

You can activate the vibration alarm in addition to or in place of the
ringing tone.
Please proceed as shown in the overview on page 27 to activate or
deactivate the vibration alarm.
The activated function is ticked and can be deactivated by selecting
the option once more.
The ringing tone can be deactivated if the vibration alarm is activated,
See page 31.

Setting the auto answer function

This function allows you to accept calls by removing the mobile tele-
phone from the charging shell.
Please proceed as shown in the overview on page 27 to activate and
deactivate the auto answer function.
The activated function is ticked. It can be deactivated by selecting the
option once more.

Resetting the defaults

This function allows you to restore the default settings at your mobile
telephone, e.g. when lending your mobile telephone to a third party.
Please proceed as shown in the overview on page 27 to restore the
default settings.
The default settings are described on page 28. The mobile telephone
features are handled as follows when resetting the defaults:
Feature
Telephone directory
Redial list
System registration
Reset
retained
deleted
retained