Swap/Conference - Siemens S46 User Manual

6.11.01 S46 US DRAFT

Swap/Conference

Some functions may not be supported by
your service provider.
You can call another number during a
call. You can switch back and forth
between both calls or link all callers
together in a conference.
During a call, inform the other party
of your intention, then:
Hold
Put the current call on
g+ROGg
hold.
You can now dial a new number.
When the connection is established,
you have the following options:
Swap
Swap back and forth be-
g6ZDSg
tween the two calls.
End current call.
The following query is dis-
played:
"Back to the call on hold?"
Return to the held call or
g<HVg
The held call is ended.
g1Rg
A31008-H5450-A5-*
Making a phone call

: :
Menü
Conference
9 9
Open call menu and sel-
PHQXg
ect Conference.
A held call is added (conference call
with up to 5 subscribers).
To end:
All calls are ended simul-
taneously when the End
key is pressed.
Swap/Conference
In TDMA mode, a conference may
have up to three subscribers.
Press 1 x for conference
g6ZDSg
Press 2 x for 1st subscriber
Press 3 x for 2nd subscriber
then begin from start.
To end:
All calls are ended simul-
taneously when the End
key is pressed.
Call transfer
9 9
Open call menu and sel-
PHQXg
ect Call
The original call is joined to the sec-
ond one. For you, both calls are now
ended. Note: Not yet supported by
all service providers.
23
transfer.