Preparing The Handset; Delivery Package; Inserting The Batteries (Automatic Registration); Charging The Batteries - Siemens Gigaset 4000i Comfort Operating Instructions Manual

Preparing the handset

Delivery package

Gigaset 4000i Comfort handset, two batteries, charg-
ing unit, belt clip, operating instructions.

Inserting the batteries (automatic registration)

G Make sure you insert the batteries the right way
round – see diagram on the left.
G
Replace the cover and push gently upwards until it
clicks into place.
G
To open press the grooved area on the cover and
slide back.
k
Ö
If registration is successful you will hear a confirma-
tion tone (rising sequence).

Charging the batteries

Leave the handset for approx. five hours in
the base station/charging unit to charge the
5 h
batteries, as they are not charged when
they leave the factory. The charging status
icon flashes on the handset to indicate that
the batteries are being charged:
= Batt. flat
(battery symbol flashes)
e Batteries
6
Before activating your handset, place
it in the Gigaset 4010i Comfort base
station with the display facing
upwards. The handset is automati-
cally registered; this is shown on the
display (e.g. INT1)
1
/ charged
3
V Batteries
U Batteries full
2
/ charged
3