Figure 18: Removing The Feet From The Gs970Emx/10 Switch; Figure 19: Attaching The Rkmt-J05 Handles To The Short Brackets - Allied Telesis GS970EMX/10 Installation Manual

Chapter 3: Installing the GS970EMX/10 Switch in an Equipment Rack
54
2. Remove the four bumper feet from the bottom panel of the switch with
a Phillips-head screwdriver. Refer to Figure 18.
Figure 18. Removing the Feet from the GS970EMX/10 Switch
3. Attach the handles in the RKMT-J05 kit to the short brackets using the
supplied M3x6mm pan head screws and a Phillips-head screwdriver.
Be sure to attach the handles to the correct sides of the short brackets
for your switch-brackets configuration. Refer to Figure 19. The handles
are optional.
Figure 19. Attaching the RKMT-J05 Handles to the Short Brackets