Allied Telesis GS970EMX/10 Installation Manual page 3

Electrical Safety and Emissions Standards
This product meets the following standards.
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void your right to operate
this equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning: In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
Electrical Safety: EN 62368-1 (UL/EN/IEC)
Laser Safety
Table 1 lists the product certificates.
Additional Certificates
Australia/New Zealand
Common Criteria
U.S. Federal Communications Commission
Industry Canada
EN 60825-1
Table 1. Product Certifications
CISPR Class A
(Comité International Spécial des Perturbations
Radioélectriques)
RoHS Compliant
RCM
(Regulatory Compliance Mark)
NIAP
(National Information Assurance Partnership)
3