Table of Contents
Advertisement
11. Wait for 2 minutes to let the particulate filter cool down.
12. Press drop out to exit the DPF function.
5.5.
BMS RESET
The Battery Management System (BMS) allows the scan tool to evaluate the battery charge state, monitor the
close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
This function enables you to perform a resetting operation on the monitoring unit of the vehicle battery, in which
the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
⚫
The main battery is replaced. Battery matching must be performed to clear original low battery information
and prevent the related control module from detecting false information. If the related control module
detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop
function, sunroof without one-key trigger function, and power window without automatic function.
⚫
Battery matching is performed to re-match the control module and motoring sensor to detect battery power
usage more accurately, which can avoid an error message displayed on the instrument cluster.
The operation guidelines of the BMS Reset function are shown below:
Figure 5-15 Sample of DPF function (screen 5)
Figure 5-16 Sample of DPF function (screen 6)
41
Advertisement
Table of Contents
