STC Easy2Build Easy-Grow 8' x 8' Assembly Instructions Manual page 12

Carefully line up connector S04 with pro le L02B and connector S05 with pro le L02A.
1.7A
Slide pro les L01I and L01J half way into place. Continue sliding until connectors
S04 and S05 click securely into pro les.
L02B
L03C
S04
L01I
!
There is only one way to properly fasten connectors into pro les. Line up parts
rst to ensure correct placement. Slide connectors until they CLICK securely into
pro le. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.
1.8A
Slide hex bolt S13 into channels of pro les L05A and L05H as shown.
L05A
www.stcny.com
NOTE: ALL VIEWS ARE FROM INSIDE.
L03L
L03K
L03D
L01J
1.8B
L05H
S13
1.7B
Line up holes on connectors S08 with holes in
pro les L01I and L01J. Secure each connector
with two S02 screws.
L02A
Connectors S04 and S05 CLICK into place.
S05
Screw hex nut S14 onto bolt. Do not completely tighten.
S14
Pro le
10 of 55
S08
L01I
S02
Screw
L05A
L05H
Nut / Bolt
QTY
#L05A 2
#L05H 2
QTY
#S02 6
QTY
#S13 6
#S14 6